Logo
Get Estimate

Flat Roof Installation & Repair in Houston: Watertight TPO & 2-Ply Low-Slope Systems


If your home or commercial building has a flat roof, a covered patio addition, or a low-pitch transition, standard shingles and quick tar patches will fail. Houston downpours dump inches of rain in minutes, and without proper pitch, water sits, seeps under laps, and rots your decking. When a slope drops below a 2:12 pitch, nailing shingles violates local building code and gives insurance adjusters an easy reason to deny leak claims. At Standard Roofing, we build flat and low slope systems engineered specifically for standing water and intense Texas heat. We don't take shortcuts with thin single ply sheets or cheap rolled asphalt. We install commercial grade 2 ply SBS modified bitumen and hot air welded TPO assemblies with custom tapered drainage to eliminate ponding water and protect your property long term.

Roofing professional inspecting a residential roof in Houston, Texas.
5.0 Google Rating Verified Local Reviews
Licensed & Insured Full General Liability Coverage
GAF Certified Factory Authorized Roofing Contractor
Houston, TX Local North Houston Headquarters
Engineered flat roof and low-slope patio installation in Houston by Standard Roofing
Standard Roofing Impermeable Low-Slope Systems. 100% Code Compliant.

Engineered Low-Slope Performance

Flat Roof Benefits: Stopping Ponding Leaks, Passing Inspection & Cutting A/C Load

A low-slope roof requires an impermeable waterproofing barrier that performs under extreme conditions. Here is what our engineered installation delivers for your property:

01

Stops Standing Water from Leaking Inside

Unlike shingles that rely on a slope to shed rain, our systems feature completely fused or dual-layer staggered seams. Even if torrential Gulf Coast storms leave water sitting around scuppers and drains for 48 to 72 hours, the waterproof barrier will not let moisture penetrate your decking.

02

Guarantees City of Houston Code Compliance (IRC R905)

Local codes forbid shingles on slopes under 2:12. Putting shingles on a shallow patio or room addition leads to active leaks and red flags during property sales. We install code-certified membranes and engineered transition metal so your roof passes city inspections and keeps your insurance coverage valid.

03

Eliminates Puddles with Tapered Insulation

Flat roofs fail where water ponds and bakes in the sun. If your deck has low spots or lacks natural drainage, we install tapered polyiso insulation beneath the membrane. This creates a continuous 1/4-inch-per-foot slope that directs heavy storm runoff straight into your drains and gutters.

04

Cuts Heat Transfer into Living Spaces

Most low-slope additions, sunrooms, and flat-roof homes have minimal attic clearance. Our bright-white reflective membranes bounce up to 86% of solar radiation back into the sky, lowering rooftop surface temperatures by 40°F to 50°F and reducing the workload on your air conditioning units.

Have a flat roof or patio addition that is leaking or holding water?

We will walk your roof, check the drainage, and give you a straightforward, trade-backed solution to keep your building dry.

Call Standard Roofing (713) 347-3802 →

Architectural Applications

Where Low-Slope Roofing Belongs in Houston tx

A low-slope roof is not just a generic flat cover; it has to be engineered for how your building is shaped. Most calls we get across Houston are not for standard roofs; they come from specific trouble spots where water constantly finds a way inside.

Here are the structures where we install and repair low-slope membrane systems:

01

Covered Patio Additions & Room Extensions

The number one source of flat roof leaks in Harris County is a patio cover or master suite addition tied into an existing shingle roof. Contractors routinely nail shingles over the flat section, creating an immediate leak path. We fix this by removing the lower shingle courses, custom-bending a heavy metal transition apron, running waterproof membrane 18 inches up the steep deck, and locking it into the flat roof so storm water cannot back up underneath.

02

Modern Flat-Roof Urban Homes (Parapet Walls)

Custom contemporary homes in The Heights, Montrose, and Midtown feature sharp lines with hidden drainage behind vertical parapet walls. We run our waterproof membranes continuously up the interior walls and cap them with custom-fabricated, heavy-gauge coping metal bent in-house to protect your walls from wind-driven rain.

03

Mid-Century Modern Ranches (Exposed Ceilings)

Neighborhoods like Spring Branch and Meyerland have classic low-pitch ranch homes with open-beam ceilings and zero attic space. We fasten rigid polyiso insulation directly above the tongue-and-groove decking before installing the membrane, keeping the home original architecture intact while dropping summer indoor temperatures.

04

Commercial Retail, Warehouses & Multi-Family

For strip centers, offices, and low-slope apartment buildings, we install wide-sheet single-ply and multi-ply membranes that handle roof-mounted HVAC traffic, resist ponding rainwater, and keep your business running dry under heavy seasonal storms.

Our Trust and Proof

Licensed & Certified

  • GAF Master Elite — issued by GAF
  • CertainTeed Select Shingle Master — issued by CertainTeed
  • NRCA Certification — issued by National Roofing Contractors Association

Verified Reviews

Google ★★★★★5.0

Great service! My new roof was installed quickly and looks fantastic. Highly recommend!

Yelp ★★★★★4.9

Professional and efficient. They handled everything from permits to cleanup. Very happy with the results!

BBB ★★★★★4.9

Excellent experience from start to finish. The team was knowledgeable and answered all my questions.

Material Engineering

Choosing Your Membrane: 2-Ply SBS Modified Bitumen vs. Heat-Welded TPO

Property owners often ask us: "Should I go with rolled rubberized asphalt or white TPO?" The answer depends on your tree shade, roof traffic, and structural layout. We install both, and we will tell you straight which one fits your building:

Tough Puncture Defense

2-Ply SBS Modified Bitumen

Best for Shade, Heavy Trees & High Foot Traffic

If your low-slope roof sits under massive live oaks or pine trees in neighborhoods like Memorial or Spring Branch, falling limbs and service ladders can puncture thin single-ply sheets.

  • Redundant Protection: We install a commercial 2-ply rubberized SBS system featuring a heavy self-adhered base ply followed by a thick ceramic-granulated cap sheet.
  • Staggered Lap Seams: Offset seams ensure water has no direct penetration route to the underlying deck.
  • 20+ Year Impact Resistance: Redundant layers of thick asphalt absorb heavy physical impacts and keep working for decades.
Maximum Heat Reflection

Commercial 60-Mil / 80-Mil TPO

Best for Open Sun & Peak A/C Energy Savings

If your flat roof sits out in open Texas sun with zero tree cover, white TPO is the clear winner. Its bright reflective surface bounces radiant heat away directly into the sky.

  • 50°F Cooler Roof Deck: Drops surface heat drastically, taking immediate load off your air conditioners and lowering power bills.
  • Molecular Seam Fusion: Every roll joint is fused with robotic hot-air equipment running over 800°F.
  • Impermeable to Ponding: The hot-air welded joint creates one continuous sheet that sitting puddle water cannot penetrate.
Standard Roofing Ironclad Standard

Our Rule: No Single-Ply Shortcuts

Whichever system fits your building, we do not install cheap, thin 45-mil sheets, and we never lay a single ply of rolled roofing. We detail every penetration with factory-formed boots, bend our own heavy-gauge edge metal in-house, and physically probe every single linear foot of seam before signing off on the job.

Customer Reviews For Our Services

Real experiences from customers who chose our Roof Replacement services.

“They did an excellent job, professional, on time, and great quality work. Highly recommended for any roofing needs! ”

J

hamza hasan

Homeowner, Houston TX

“Standard Roofing did a fantastic job replacing our roof. They were very professional and efficient. I highly recommend them. ”

M

Biljeet Kaur

Homeowner, Spring Branch

“The roof replacement process was smooth and hassle-free. They kept me informed throughout and delivered on time. Great service!”

D

David R.

Homeowner, Galleria

Frequently Asked Questions About Flat & Low-Slope Roofing in Houston

Direct answers about patio tie-ins, building code compliance, membrane choices, and ponding water repairs from our local roofing crew.

Can I put asphalt shingles on my flat roof or covered patio addition?
No. City of Houston building code (IRC R905) strictly prohibits standard shingles on slopes below a 2:12 pitch. Shingles require gravity to shed water; on flat pitches, wind-driven rain backs up underneath the tabs, rotting the plywood deck and giving insurance companies an open reason to deny water-damage claims. Low slopes require a continuous, fully sealed waterproof membrane like 2-ply SBS or heat-welded TPO.
How do you prevent water from leaking where my flat patio connects to my shingle roof?
We do not just caulk the joint and nail it down. We remove the bottom rows of shingles on the steep slope, mechanically secure a custom-bent metal transition apron, and run a high-temperature self-adhered waterproof membrane 18 inches up the steep decking. The flat-roof membrane is then fully fused into that assembly, creating an airtight, watertight tie-in that keeps driving rain from creeping under your shingles.
What is the price difference between 2-Ply Modified Bitumen and TPO in Houston?
Both systems are similarly priced, typically ranging between $5.50 and $10.00 per square foot installed, depending on decking repairs, insulation thickness, and perimeter flashing needs. TPO costs slightly more when custom tapered insulation is needed to fix standing water, but it delivers greater monthly savings on electric bills by reflecting solar heat away from the building.
How do you fix water that constantly sits in puddles on my flat roof?
Puddles happen when the structural rafters sag or the roof was built without positive fall. Instead of rebuilding your wood framing, we mechanically fasten tapered polyiso insulation boards directly over the deck before laying the membrane. This creates an engineered 1/4-inch slope that channels standing rainwater straight to your scuppers and gutters so water drains off within hours of a storm.
Can I walk on my flat roof to clean gutters or service my AC unit?
Yes. Our 2-ply SBS modified bitumen systems have a thick, granulated ceramic surface that handles ladder drops, heavy toolboxes, and regular foot traffic easily. If you choose a TPO roof, we heat-weld heavy-duty, textured TPO walkway pads along your service path and around your air handlers to protect the underlying membrane from dropped screws and tool punctures.

Have a question about your flat roof or suspect a hidden leak?

We will inspect your slope, check your transition seams, and give you an honest recommendation on keeping your building dry.

Call Standard Roofing: (713) 347-3802

Contact Our Roofing Experts

We invite you to reach out for all your roofing needs. Our team is available Monday to Friday, ready to assist you with prompt responses.

Or call us right now at (713) 347-3802 — we answer.

Standard Roofing Houston tx


  • Address

    215 Rittenhouse St Unit E, Houston, TX 77076, United States, Houston, Texas

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available