Logo
Get Estimate

Gutter Installation & Repair Services in Houston, TX


If water is pouring over your gutters during heavy rain, dripping behind the metal and rotting your fascia, or pulling the brackets out of the wood, the system is failing to protect your property. In Houston, when roof runoff dumps right along your foundation slab, it quickly turns into costly foundation shifts, ruined landscaping, and rotted wood eaves. At Standard Roofing, we provide complete seamless gutter installation, precision realignment, and leak repair across Houston. We don't install cheap, pre-cut store sections that leak at every joint. We bring our mobile extrusion machine directly to your property, measure your rooflines, and fabricate continuous heavy gauge gutters fitted specifically to your home’s drainage load. Whether you need a section re hung, corner seams re sealed, or an undersized system replaced before the next storm, we handle the job cleanly and correctly.

An old rural house with a damaged clay tile roof in Chennai, India, showing signs of decay.

Common Gutter Problems We Fix in Houston

Most gutter failures in Houston come down to improper sizing or shortcut installations that simply can't handle our heavy rain. Here are the issues we see every day and how we take care of them:

01

Water Spilling Over the Front

Builder-grade 5-inch gutters are often too small for torrential Houston downpours, causing water to pour over the edges and wash away flowerbed soil.

→ We swap them out for 6-inch seamless troughs and larger 3x4 downspouts that easily handle the full rain volume.

02

Water Dripping Behind the Gutter

When a gutter is hung below the roof drip edge without a metal apron, surface tension pulls water straight down the wooden fascia board.

→ We tuck the back lip properly behind the metal flashing so your eaves stay dry and wood rot never starts.

03

Gutters Pulling Loose from Roofline

Old-school spikes and nails gradually back out under weight as the wooden fascia expands and contracts through Houston’s heat and humidity.

→ We re-secure the run with heavy-duty internal hidden screw hangers driven straight into structural rafters every 24 inches.

04

Standing Water That Won't Drain

If dirty rainwater sits inside the trough for days after a storm, the gutter lacks the proper slope or has low sagging spots.

→ We laser-level and re-hang the run with a steady slope toward the downspouts so water empties completely and mosquitoes can't breed.

05

Leaking Corners and Seams

The Texas sun bakes cheap silicone caulk until it dries, splits, and leaks right over doorways, walkways, or foundation corners.

→ We reseal joints with commercial UV-stable polyurethane, or fabricate custom seamless runs with zero intermediate joints.

Custom seamless gutter fabrication and installation in Houston by Standard Roofing

Our Gutter Installation Standards

The Standard Roofing Gutter Installation Process

When we install a gutter system on your home, we don't bring pre-cut pieces from a box store. We roll-form custom seamless aluminum troughs right in your driveway so each piece fits your roofline with zero leak-prone middle seams.

  • 1. Tear-Off and Fascia Check

    We carefully take down the old gutters and check the wood underneath. If we find soft spots or rot behind the old metal, we replace that wood first so your new gutters are anchored to solid timber.

  • 2. Custom Fabrication in Your Driveway

    We run thick, heavy-gauge aluminum through our mobile machine on-site. Every run is made in one solid piece from corner to corner—no splices, no middle seams to leak later.

  • 3. Setting the Right Slope

    We pitch the gutters with an exact downward angle toward the downspouts so water clears out fast during hard rain and leaves no standing water behind.

  • 4. Heavy-Duty Hidden Hangers

    Instead of cheap spikes that pull loose, we screw heavy-duty internal hangers directly into the rafter tails every 24 inches so the trough can hold the weight of heavy storm water.

  • 5. Proper Drip Edge Protection

    We tuck the back wall of the gutter securely behind your roof's drip edge metal so water can never curl backward and rot your fascia board.

  • 6. Large Downspouts & Safe Drainage

    We install oversized 3x4-inch downspouts that won't choke on small leaves or roof grit, and we route the discharge well away from your foundation slab.

Routine Maintenance

Gutter Cleaning Services: Keeping Water Moving Freely

If your gutters are packed with oak leaves, pine needles, or roof grit, water has nowhere to go but over the edges and straight into your foundation. Here is what we do when we clean your system:

01

Complete Hand Removal

We don't just blast muck with a blower and leave a mess on your siding. We scoop out all packed leaves, sludge, and roof grit by hand and bag it so your yard and driveway stay spotless.

02

Flushing the Downspouts

Clear gutters mean nothing if the downspout elbows are choked. We run high-flow water through every downspout to flush hidden blockages and verify that water discharges freely away from your slab.

03

Basic System Check

While we're up at the roofline, we look for loose hidden hangers, rotted fascia boards, low sagging spots, and dried corner seals—flagging minor issues before they become major leaks.

Long-Term Protection

Gutter Guard Installation: Keep Debris Out for Good

Cleaning gutters multiple times a year gets exhausting, and climbing ladders is a hazard. We install commercial-grade micro-mesh leaf screens directly over your existing or new gutters to keep debris out while taking in heavy rain.

01

Stainless Steel Micro-Mesh

Surgical-grade stainless mesh is tight enough to block pine needles, stringy oak tassels, and fine shingle grit, while allowing sudden downpours to drop straight through into the trough.

02

No Screws into Your Roof

We mount our guard systems cleanly to the gutter lip and fascia. We never slide guards under your shingles or drive screws through your roof deck, keeping your manufacturer roof warranty 100% intact.

03

Less Maintenance, No Clogs

Keeps your troughs open and draining freely in every season. Water never pools up to rot your wooden fascia boards or create stagnant breeding grounds for Texas mosquitoes.

Tired of overflowing gutters or climbing up on the roof?

Give us a call and our local Houston crew will take care of it for you.

Call Us: (713) 347-3802

Our Trust and Proof

Licensed & Certified

  • GAF Master Elite — issued by GAF
  • CertainTeed Select Shingle Master — issued by CertainTeed
  • NRCA Certification — issued by National Roofing Contractors Association

Verified Reviews

Google ★★★★★5.0

Great service! My new roof was installed quickly and looks fantastic. Highly recommend!

Yelp ★★★★★4.9

Professional and efficient. They handled everything from permits to cleanup. Very happy with the results!

BBB ★★★★★4.9

Excellent experience from start to finish. The team was knowledgeable and answered all my questions.

Customer Reviews for Gutter Repair and Replacement

Real experiences from customers who chose our Roof Replacement services.

“They did an excellent job, professional, on time, and great quality work. Highly recommended for any roofing needs! ”

J

hamza hasan

Homeowner, Houston TX

“Standard Roofing did a fantastic job replacing our roof. They were very professional and efficient. I highly recommend them. ”

M

Biljeet Kaur

Homeowner, Spring Branch

“The roof replacement process was smooth and hassle-free. They kept me informed throughout and delivered on time. Great service!”

D

David R.

Homeowner, Galleria

Frequently Asked Questions About Gutters in Houston

Straightforward pricing, sizing advice, and real answers about seamless gutters from our local installation crew.

What is the average cost of installing gutters in Houston?
For a typical single-family home (around 150 to 200 feet of gutters), most complete seamless aluminum installations run between $1,200 and $2,400. The final price depends on whether your home is one or two stories, how many corners and downspouts are needed, and whether we're installing standard 5-inch or heavier 6-inch troughs.
How much should it cost to install a gutter?
Seamless aluminum gutters generally cost $6 to $12 per linear foot installed, including materials, hidden screw hangers, and standard downspouts. If you have steep rooflines, difficult second-story access, or want heavy-gauge 6-inch profiles for high-volume drainage, it tends to sit closer to $9 to $14 per foot.
How is 100 ft of gutter priced?
A basic 100-foot run of seamless aluminum gutters usually costs between $700 and $1,200 installed, complete with hangers, end caps, and downspout drops.
How much should it cost to repair a gutter?
Simple repairs—like re-securing a sagging 20-foot run, re-pitching a flat section, or sealing leaking corners—typically range from $175 to $450. If the wood fascia board behind the metal is rotten and needs replacement, repairs usually range from $350 to $800+, depending on how many feet of lumber we need to replace and paint.
Do I need gutter guards in Houston?
If you have large Live Oaks, Pecan trees, or Pine trees hanging over your roof, yes—micro-mesh guards pay for themselves by stopping spring catkins and pine needles from clogging your downspouts every month. If your yard has no overhead trees and you only get basic roof grit, regular open gutters with a once-a-year checkup are usually all you need.
How do I know if my fascia board is rotted behind the gutters?
Look for three clear signs from the ground:
  • The gutter looks wavy, tilts forward, or the mounting screws/spikes are visibly pulling out of the wood.
  • You see dark water stains, soft peeling paint, or green mildew on the underside of the wooden eave right behind the gutter.
  • During a rainstorm, water drips steadily between the back of the gutter and the wood instead of flowing out the downspout.

Contact Our Roofing Experts

We invite you to reach out for all your roofing needs. Our team is available Monday to Friday, ready to assist you with prompt responses.

Or call us right now at (713) 347-3802 — we answer.

spphire smiles dentistry


  • Address

    215 Rittenhouse St Unit E, Houston, TX 77076, United States, Houston, Texas

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available