“They did an excellent job, professional, on time, and great quality work. Highly recommended for any roofing needs! ”
hamza hasan
Homeowner, Houston TX
Your fascia and soffits are not decorative trim—they seal the gap between your roof deck, exterior walls, and gutters while venting your attic. In Houston, where 90% humidity and heavy driving rain are standard, this area takes the hardest hit. When homeowners call us about peeling paint or a soft spot at the corner of their roof, their biggest worry is usually: "Is the whole roof failing, or is someone just going to paint over rotted wood and charge me for it?" At Standard Roofing, we don't smear caulk over soft wood and walk away, and we don't try to sell you a new roof when only your eaves need work. We open up the damaged section, check the rafters behind it, replace only the bad lumber, and correct the actual water issue so the rot doesn't come back next year.
Visual Inspection Checklist
Walk around the perimeter of your home and look straight up under the overhangs. If you spot any of these signs, moisture or airflow problems are already developing:
If pressing on the bottom edge of your eave feels like pressing into a wet sponge, water has penetrated the wood core.
If fresh exterior paint keeps bubbling or flaking off in the same spot, moisture is pushing through the wood from behind.
When fascia wood softens, gutter screws lose their grip and the metal trough begins to sag forward.
Small rot holes under the overhang give squirrels, raccoons, and wasps an easy entryway into your attic space.
Painted-over or blocked soffit vents trap heat above your ceilings, driving your AC bills up and cooking your shingles.
Houston Climate Reality
Down here, eaves take a beating from both sides. Exterior moisture rots the front of the wood, while extreme attic heat cooks it from behind. Here is why the eaves fail before the rest of your roof:
Our Standard Replacement Rule
We never patch rotting pine with putty. We cut out bad sections down to solid rafter framing, install rot-resistant fiber cement or primed spruce, and guarantee proper water diversion.
When gutters clog or sag, water spills over the back edge instead of the downspouts. The 1x6 fascia board acts like a sponge, absorbs that moisture, and rots from the backside out.
If the metal drip edge along the roofline doesn't extend properly into the gutter, water curls backward under the shingles and runs straight down the face of the wood.
High humidity softens exterior trim over time. Once an eave has a soft patch, squirrels and raccoons can chew through it in hours to nest in the warm attic insulation.
Soffit vents pull fresh air into your attic to push hot air out through the ridge. When old paint layers clog those vent screens, attic temperatures regularly climb past 140°F in July, speeding up shingle breakdown.
Full Eave Restoration
When we take on an eave repair, our priority is removing the bad wood and fixing the moisture problem so you do not have to deal with it again next season:
We do not skim putty over soft spots or paint over water damage. We remove the damaged board completely and cut back to clean, healthy lumber.
When fascia rots, the rafter ends behind it often take moisture damage. We check every exposed rafter tail and bolt on new structural framing lumber (sistering) if the wood has softened.
We install primed exterior-grade cedar or James Hardie fiber-cement trim. Hardie board does not rot, swell, or warp in Houston humidity, making it an ideal long-term replacement.
We adjust the metal drip edge or add an apron flashing under the shingles so roof runoff drops directly into the gutter instead of wicking backward behind the wood.
If old plywood was blocking your vents, we install continuous vented soffits to keep fresh air moving through your attic and relieve summer heat build-up.
Why Work With a Dedicated Roofing Crew Instead of a Handyman
A general handyman will typically pull down a rotted 1x6 board, nail up a fresh piece, and paint over it. The problem? They rarely look at the water path. If water is curling behind the drip edge, pooling in an unpitched gutter, or seeping under an eave shingle, that new board will rot out just as fast.
→ We are licensed roofing contractors. When we replace a fascia board, we address the entire roofline—shingle overhangs, drip edges, gutter pitch, and rafter integrity—so the actual cause of the water intrusion is permanently resolved.
Google ★★★★★5.0
Great service! My new roof was installed quickly and looks fantastic. Highly recommend!
Yelp ★★★★★4.9
Professional and efficient. They handled everything from permits to cleanup. Very happy with the results!
BBB ★★★★★4.9
Excellent experience from start to finish. The team was knowledgeable and answered all my questions.
Real experiences from customers who chose our Roof Replacement services.
“They did an excellent job, professional, on time, and great quality work. Highly recommended for any roofing needs! ”
hamza hasan
Homeowner, Houston TX
“Standard Roofing did a fantastic job replacing our roof. They were very professional and efficient. I highly recommend them. ”
Biljeet Kaur
Homeowner, Spring Branch
“The roof replacement process was smooth and hassle-free. They kept me informed throughout and delivered on time. Great service!”
David R.
Homeowner, Galleria
Repair pricing depends on the linear footage, the material used, and how high we have to work. We evaluate the roofline in person so you get exact numbers with zero guesswork.
Typical Repair Benchmarks
$350 – $2,200
Spot repairs run $350 to $750. Larger multi-side eave and vented soffit replacements range between $900 and $2,200 depending on linear footage and structural rafter prep.
4 Factors That Shape Your Estimate
Spot Repairs (5 to 15 Feet)
Fixing a single localized rotten corner or replacing a short run behind a leaking gutter typically costs between $350 and $750, including damaged wood removal, new lumber installation, and watertight caulking.
Larger Section and Multi-Side Replacement
Replacing 30 to 60+ feet of rotted fascia and vented soffit panels across an entire roofline usually ranges from $900 to $2,200, ensuring complete protection from rain and pests.
Material Choices (Wood vs. Fiber Cement)
Standard primed exterior wood runs roughly $8 to $15 per linear foot installed. Rot-proof fiber cement (HardieTrim) runs closer to $14 to $24 per foot, which pays for itself by eliminating rot, swelling, and termite damage permanently.
Working Height and Jobsite Access
One-story ranch homes are straightforward and move quickly. Steep two-story rooflines or tight zero-lot lines requiring specialized ladder staging and safety scaffolding will carry higher labor setup costs.
Direct answers about fascia board replacement, gutter coordination, and long-term rot solutions from our Houston crew.
Have soft wood, peeling trim, or sagging gutters along your roofline?
Call Standard Roofing at (713) 347-3802 for an honest on-site inspection.
Roof repair services address minor issues before they escalate into major problems. Regular maintenance can prolong the life of your roof.
View Roof RepairEmergency roof repair services are crucial for urgent situations like storm damage. We respond quickly to secure your home and prevent further damage.
View Emergency Roof RepairStorm damage repair focuses on restoring roofs affected by severe weather. We assess and fix issues to ensure your roof is safe and functional.
View Storm Damage RepairHail damage roofing services specialize in repairing roofs after hail storms. We provide thorough inspections and quality repairs to restore your roof's integrity.
View Hail Damage RoofingWe invite you to reach out for all your roofing needs. Our team is available Monday to Friday, ready to assist you with prompt responses.
Phone
(713) 347-3802Address
215 Rittenhouse St Unit E, Houston, TX 77076, United States, Houston, Texas
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available
